Thursday, September 17, 2020

SIMTOS 2020 Cancellation


SIMTOS secretariat, Korea Machine Tool Manufacturers’ Association (KOMMA) has been preparing SIMTOS 2020 in close cooperation with KINTEX and public health authorities, monitoring real-time updates of COVID-19 carefully to prevent the spread of the virus and host the show postponed to October 2020.

As you might know, it would be extremely hard to end COVID19 pandemic. As of July 20th, more than 14 million people have been infected and about 0.6 million people have lost their lives due to COVID-19. Recently, the spread of COVID-19 occurs again in Korea. According to the Korea Centers for Disease Control and Prevention (KCDC), The number of new daily infections was in the 50s in Korea. Therefore, The Korean government strongly recommended that any group events should not be hosted.

Considering health and business of exhibitors, attendees, and official contractors as top priority, it is not possible to host SIMTOS which the most attendees visit in Korea. Therefore, we decided to cancel SIMTOS 2020 scheduled for Oct. 6~9, 2020 eventually.

We would like to appreciate everyone for your continuous supports and interest of to SIMTOS and for understanding. Even though the cancellation of SIMTOS causes a lot of damage and cost, we are going to encourage exhibitors to overcome the difficult time.

SIMTOS will be coming back in 2022 as the leading manufacturing technology show in Korea to the new leap forward of manufacturing industry.

We look forward to seeing you again in SIMTOS 2022

Energy Taiwan 2020 Ready to Shine in October : A Networking Platform for Business Opportunities in the Renewable Energy Industry


The annual “Energy Taiwan” sets to run from October 14th to 16th, 2020 at the Taipei Nangang Exhibition Center, Hall I features four major themes - solar photovoltaics, wind energy, hydrogen energy and fuel cells, and smart energy storage. More than ten thousand buyers from home and abroad are expected to visit the exhibition. With various seminars also scheduled to be held during the show, “Energy Taiwan” – the one and only B2B platform that shows the entire renewable energy ecosystem of Taiwan looks forward to seeing important industry players from all over the world.

Taiwan's Geographical Advantages for Renewable Energy Development
Due to its subtropical latitude and climatic conditions, as well as its sunshine duration, Taiwan has many things it takes to develop the photovoltaic (PV) industry. In combined with its good foundation in the semiconductor and optoelectronic industries, and rich experiences in cultivating professional talents and manufacturing management, it explains why Taiwan’s solar photovoltaic industry has been growing rapidly and has become the world’s second largest solar cell manufacturing country; and through advanced technology it is also steering the industry in the direction of becoming a highly value-added and different one with systemic development. According to the international market research institute 4C Offshore, out of the top 20 best offshore wind farms in the world, Taiwan is gifted to have 16 of them and therefore in a very good place to develop wind power. Taiwan government is working closely with the industry, the academia and research institutes to bring all the resources together, and is launching the offshore wind power national team ‘Wind-Team International Co-operative Alliance’ and the ‘Marine-Team’ on offshore wind power marine engineering in the hope to establish Taiwan's wind power ecosystem.

With the World’s Most Influential Companies Committed to Renewable Energy, Taiwan Sets to be “Asia’s Center of Green Energy”

Global technology giants, such as Facebook, Google, Apple and Microsoft have joined the RE100 global initiative, aiming to go 100% renewable by 2050. Taiwan’s leading semiconductor manufacturer TSMC is also one of them, showing that the energy transition is a shared goal of the international community. Following this global trend, Taiwan government announced its six core strategic industries (green energy and renewable energy industries included) and actively pushes forward related energy transition work. Driven by solar and wind energy industries, Taiwan is sparing no efforts in promoting its ‘greening’ policy and tries to make Taiwan the “Asian Green Energy Center”. This year, “Renewable Energy Week” will once again be held in tandem with “Energy Taiwan” that will highlight the development and achievements of special municipalities and local governments in implementing renewable energy projects.

Backed by an All-star Lineup of Companies, “Energy Taiwan” is the Largest Event in the Energy Industry
Focusing on solar photovoltaics, wind energy, hydrogen energy and fuel cells, and smart energy storage, “Energy Taiwan 2020” will be joined by YSOLAR, TSEC, Motech, AUO, Win Win Precision Technology, Sysgration, Taya Group, Mobiletron, Swancor renewable energy (SWE), Ørsted, EnBW Asia Pacific, Copenhagen Infrastructure Partners (CIP) and Hai Long Offshore Wind Farm (Project). It is literally a complete energy industry chain one cannot see anywhere other than this show. No wonder “Energy Taiwan” is also the most favored platform for the heavyweight exhibitors to announce their latest products or to enhance their brand exposure.

Online Activities to Bring up Business Opportunities in the Renewable Energy Industry
A social distance became a must after the conoravirus pandemic spread across the world this year. It was under this kind of circumstance that long-distance activities were put on the center stage. To spice up energy industry exchanges and business opportunities, the Taiwan External Trade Development Council (TAITRA) launched the “Taiwan Trade Shows (TTS) Insights” online series, and the episode in July brought the attention to the green industry and the representatives from the Industrial Technology Research Institute (ITRI), Taiwan Wind Energy Association, Hai Long Offshore Wind Farm and TSEC were invited to talk about the development of renewable energy, its potential of becoming a trillion dollars (NTD) industry and opportunities that might arise from the perspectives of research institutions, industry associations, foreign investors, and local Taiwanese manufacturers.

Online sourcing meetings will also be held where the local companies can connect with important buyers put together by the 63 overseas offices of TAITRA in “real time”, hoping it will lead to further cooperation in the future. Those who are interested are welcome to register and visit “Energy Taiwan” to grasp new business opportunities in ‘energy creation’, ‘energy storage’

Visit Energy Taiwan Official Website : https://www.energytaiwan.com.tw/

Wednesday, August 19, 2020

TMTS 2020 SWITCHED TO VIRTUAL EXHIBITION, NEXT PHYSICAL EXHIBITION IS SCHEDULED IN 2022

Due to a variety of reasons, such as the COVID-19 Pandemic remains uncertain, travel difficulties for international visitors and exhibitors, and the unbearable loss of temporary suspension, etc., the organizer, TMBA-Taiwan Machine Tool & Accessory Builders' Association, has decided to alternate TMTS – the Taiwan International Machine Tool Show to an online virtual exhibition.

TMBA will be launching the virtual exhibition, along with a series of peripheral physical events in the TMTS week (10-14, November 2020). In this case, not only can TMBA guarantee the safety and health of our exhibitors and visitors, but also can we keep them connected.

The next physical exhibition of TMTS is scheduled in 2022. TMBA sincerely appreciates the understanding from all of our exhibitors and visitors, as well as the partners from all around the world..

TMTS Online Exhibition


TMTS Online Exhibition has been opened and will launch a 3D digital exhibition. The exhibit contents include intelligent machinery solutions, professional forums, business matching and special events. TMTS Online Exhibition will showcase the professional brand image of machine tools, and the accurate domestic and international buyer database collected over the past ten years, continuing to serve the exhibitors. The organizer will promote the "TMTS Online Exhibition" and extend the exhibition benefits to attract more domestic and overseas resources and business opportunities.

For the latest information, please visit the TMTS official website.



Di Chun Iron Work co., Ltd

Di Chun expanded in 1992 and established the brand “Auto Strong“ which has a meaning of being precise and strong as eagle’s claw, in order to emphasize the quality and high performance of Di Chun products, this is our value to focus on research, development and innovation, solid our career in Taiwan then head to the international machine tool equipment market; meanwhile, the precise production process were compliments by our customers.

Product Name Picture Description
Short type non through-hole rotary hydraulic cylinder with central bare for air 1. Lightweight design can reduce the spindle for vertical lath.
2. Built-in check valve and stroke control brackets.
3. Developed for rear locking installation.
4. Can be installed with air function.
Pneumatic power chuck 1. Universally used in turning machines, rotary tables.
2. Air chuck for external clamping with a built-in pneumatic cylinder.
3. Fast and clamping jaw stroke.
6 Jaw Scroll Chuck 1. SE types are specially meet for drilling*endmilling*tapping or grinding in tool grinders.
2. Huge bore diameter design for wider application of bar workpieces.
3. SE type feature gripping for thin tube and high roundness accuracy.
4. The body is made of MEEHANITE. It is suitably used for high speed revolution and 3 times more durable than regular material.

FURNITURE CHINA 2020 has been Countdowned

Since the inception in 1993, China International Furniture Expo (Furniture China), jointly organized by China National Furniture Association (CNFA) and Shanghai Sinoexpo Informa Markets International Exhibition Co. Ltd., has enjoyed constant and rapid growth.

The exhibition scale has grown from an initial 3,000 square meters to current 350,000 square meters, covering two venues: SNIEC (Furniture & Supplies) and SWEECC (Home Decor) that are interconnected with city-wide design activities under Shanghai Home Design Week.

Furniture China plays an important role in offering trade business with easier approaches, affordable prices and supportive services, which greatly welcomed by global furniture traders to establish business contacts and export furniture to the world.

Sourcing affordable high-end furniture, decor & accessories at Furniture China. Over 160 countries' traders are participating for cooperative partnership with China's export / import business.

In 2020, the 26th edition of Furniture China alongside its co-located event FMC China and FMC Premium, will showcase a diverse variety of affordable high-end contemporary furniture designs, up-to-date interior trends as well as innovative furniture manufacture by categories arranged in a clear classification in the venue SNIEC.

Why Furniture China?

Furniture China - The professional international and region’s leading B2B furniture trade fair to source mid/high-end finished furniture products and supplies.

SCALES:
3,500+ exhibiting companies; 350,000 sqm exhibition area; 170,000+ professional partcipants; 160 countries & regions

Come satisfy your sourcing needs with reliable suppliers worldwide; Meet potential partners to maximize business globally.

Interact with industry professionals, manufacturers, designers and furniture retailers; Discover the vigorous Chinese market and ever-growing furniture industry of China.

Furniture China 2019 Post Show Report

HALL LAYOUT


Outline of Furniture China 2020

Name of Exhibition Furniture China 2020
China International Furniture Expo
Date 8 September, Tuesday – 12 September, Saturday, 2020
5 Days 
Opening Hours 09:00 – 17:30 (09:00 – 14:30 on last day)
Venue Shanghai New International Expo Centre (SNIEC)
No.2345 Longyang Road, Pudong, Shanghai
Organizers China National Furniture Association (CNFA)
Shanghai Sinoexpo Informa Markets International Exhibition Co., Ltd.
Exhibit Category - Contemporary Furniture
- Design Furniture
- Upholstery Furniture
- Fashion Classic Furniture
- Outdoor/ Office/ Children's Furniture
- Table & Chair
- Raw Materials & Furniture Hardware (co-located event: FMC China/ FMP China)
- Home Decor & Lifestyle Products (concurrent event: Maison Shanghai)
Contact Shanghai Sinoexpo Informa Markets International Exhibition Co., Ltd. Address: 8F, No.355 Hong Qiao Road, Xu Hui District, Shanghai 200030
Email: furniture@imsinoexpo.com